i need help!!!
Moderator: ScummVM Team
-
- Posts: 35
- Joined: Sun Nov 05, 2006 2:46 pm
ok let me i have an older build just use that for now here the link again http://scummvm.drunkencoders.com/#downloads however this time download ScummVM v0.61 Binary
-
- Posts: 35
- Joined: Sun Nov 05, 2006 2:46 pm
-
- Posts: 35
- Joined: Sun Nov 05, 2006 2:46 pm
ok follow these instructions
Store your game files into a zip file, making sure to choose the 'No compression' option (this is sometimes called 'store'). If you don't do this, it won't work. If you have more than one game, put them in different folders in the ZIP.
Check to see whether the games you have are supported by build A, B or C, using the table of supported games below. You cannot mix games from builds A and B in the same Zip.
Put the zip file into the directory with ScummVM DS, calling it 'scummdata-a.zip' or 'scummdata-b.zip', depending on which build you're using. Make sure the games will fit on your flash card. The total size off the games cannot exceed 30Mb because of the limitation of the GBA cart bus.
Double click on the builddata-a.bat, builddata-b.bat, or builddata-c.bat as appropriate file to build your ROM image
Using your GBA flash cartridge software, burn 'scummvm-?-widthdata.ds.gba' onto your flash cartridge.
Boot your GBA using PassMe, FlashMe, or WiFiMe as appropriate
Enjoy!
Store your game files into a zip file, making sure to choose the 'No compression' option (this is sometimes called 'store'). If you don't do this, it won't work. If you have more than one game, put them in different folders in the ZIP.
Check to see whether the games you have are supported by build A, B or C, using the table of supported games below. You cannot mix games from builds A and B in the same Zip.
Put the zip file into the directory with ScummVM DS, calling it 'scummdata-a.zip' or 'scummdata-b.zip', depending on which build you're using. Make sure the games will fit on your flash card. The total size off the games cannot exceed 30Mb because of the limitation of the GBA cart bus.
Double click on the builddata-a.bat, builddata-b.bat, or builddata-c.bat as appropriate file to build your ROM image
Using your GBA flash cartridge software, burn 'scummvm-?-widthdata.ds.gba' onto your flash cartridge.
Boot your GBA using PassMe, FlashMe, or WiFiMe as appropriate
Enjoy!