COMI on p1i-ported?

corpo · Post by **corpo** » Mon May 05, 2008 10:04 am

Hey guys - I have been absent for a while
So is this thing going to work on the p1i or not?
thanx

Anotherguest · Post by **Anotherguest** » Mon May 05, 2008 7:13 pm

well even if rtendering is fixed it will be very slow.

Halo2 · Post by **Halo2** » Wed Aug 20, 2008 1:24 pm

You are right that it will be slow, but I don't think that this will be a problem with an adventure which consists mostly of "still" screens and dialogues.. .
So the fix is still highly appreciated.

Anotherguest · Post by **Anotherguest** » Wed Aug 20, 2008 2:06 pm

Go ahead and try the latest pre 0.12.0 build. That has support for COMI now.

Halo2 · Post by **Halo2** » Wed Aug 20, 2008 2:08 pm

Okay, I've tested it again with the actual build and the resolution is scaled wrong.
So I only see the top left quarter of the screen.
This was not the case on the P1i with previous versions (till 0.11).

Anotherguest · Post by **Anotherguest** » Wed Aug 20, 2008 6:18 pm

From Svn builds thread...

Panning around is one thing abit hard on the P1i, center, jog dial up and down should work some what.

Tap control button (top right), then 's' to toggle stretching.
Keys for keyboard based devices are
'f' = Flip in Landscape
'i' = Change input
's' = Stretch
'p' = Toggle Portrait/Landscape
_________________________________________
In VGA games like COMI only FULL flipped is supported, but compressed flipped/not flipped is supported.

A new installation would start in stretch mode, but since upgrading wont update the existing INI file you get this behaviour.

Laserschwert · Post by **Laserschwert** » Wed Aug 20, 2008 6:55 pm

Panning isn't that difficult... the jog-dial pans up and down, the arrow keys (to the left and right of the space-bar) pan left and right.

Any chance you can include scaling to 100% for landscape-mode as well?

Anotherguest · Post by **Anotherguest** » Wed Aug 20, 2008 7:56 pm

Ehh 1-1 scaling for landscape is there.But only in flipped. So if you get a black screen, press 'F' or '3' (depending on the phone)

Halo2 · Post by **Halo2** » Thu Aug 21, 2008 11:36 am

You were absolutely right - control button and s - toggled stretching and "resolved" the black screen issue.

I tried the pre 0.12 now which started in landscape mode and without switching the stretch mode it displayed only black.
In portrait mode (in which 080805 started?) the screen is displayed instead of black, so then just needs the correct stretch setting (and a switch to landscape mode

).

COMI on p1i-ported?

Better slow than nothing

Resolution with pre 0.12

Stretching