ScummVM Channel FINAL - IOS58 Support / SVN / Download Now!

Subforum for discussion and help with ScummVM's Nintendo Wii port

Moderator: ScummVM Team

obcd
Posts: 19
Joined: Tue Nov 09, 2010 10:09 am

Post by obcd »

I did some further checking:
Launching
Wiixplorer using IOS 58 works fine
Forwarder using IOS 36 does mount USB drive on second attempt.
HBC 1.0.8 using IOS58 refuses to mount the USB drive.
Bootmii using IOS36 does mount USB drive on second attempt. Doesn't fill in the program argument list.
Nforwarder58 using IOS58 mounts USB drive on second attempt.

The behavour of the programs using IOS36 looks consistent. It's probably using USB 1.1 in that case.

The behavour when using the HBC 1.0.8 is very strange.

Sorry for getting a little off topic with this post.
Maybe I can let the Channel launch the nforwarder58 (small program so it shouldn't take much time) and let that one load the scummvm program. Or maybe I will just wait for the new channel that hopefully uses IOS58. I just noticed that the title of this topic says that there is IOS58 support. Maybe I am using the older one?
The iosses I mention here are those reported by scummvm.
raschi
Posts: 46
Joined: Mon Jan 23, 2006 6:57 pm

Post by raschi »

Red_Breast wrote:Wasn't that WiiMC ios 202 a custom ios to unlock USB 2.0? The one made by KWiirk? Just trying to find it on Wiibrew I see the page has been deleted.
Team Twiizers recent addition of USB 2.0 is much more elegant as it uses Nintendo's USB 2.0 which had been introduced with one of the balance board games.
This is true, but the old forwarder doesn't use ios58.
I thought maybe the old forwarder could take advantage of ios202. Besides it doesn't hurt to have it installed for homebrew that still doesn't use ios58.
obcd wrote:I did some further checking:
Launching
Wiixplorer using IOS 58 works fine
Forwarder using IOS 36 does mount USB drive on second attempt.
HBC 1.0.8 using IOS58 refuses to mount the USB drive.
Bootmii using IOS36 does mount USB drive on second attempt. Doesn't fill in the program argument list.
Nforwarder58 using IOS58 mounts USB drive on second attempt.

The behavour of the programs using IOS36 looks consistent. It's probably using USB 1.1 in that case.

The behavour when using the HBC 1.0.8 is very strange.

Sorry for getting a little off topic with this post.
Maybe I can let the Channel launch the nforwarder58 (small program so it shouldn't take much time) and let that one load the scummvm program. Or maybe I will just wait for the new channel that hopefully uses IOS58. I just noticed that the title of this topic says that there is IOS58 support. Maybe I am using the older one?
The iosses I mention here are those reported by scummvm.
Maybe WiiXplorer has been compiled with a newer version of libogc, with better detection of different usb drives? Maybe it has a better implementation for detecting usb drives overall?
I believe HBC has some issues with some usb drives.
Can you try a different hdd?
tirges
Posts: 6
Joined: Tue Mar 24, 2009 10:06 pm

Post by tirges »

Wow, thanks for getting off-topic and mentioning starting ScummVM through WiiXplorer ...

Had crashes runnung through HBC (IOS58) and accessing the USB (IOmega 1TB thingy).
I thought I was just out of luck, but running through WiiXplorer works flawlessly...


Can't wait for the new forwarder :-)
User avatar
Mr_Nick666
Posts: 132
Joined: Wed Apr 11, 2007 9:59 am
Location: Bideford, Devon, UK
Contact:

Post by Mr_Nick666 »

New logos added and all working ok. Download now available at first post 8)

To all using the older builds and complaining. WHY!? I said the new one was coming! All your issues should be fixed with this download (it all worked in our tests). :wink:
obcd
Posts: 19
Joined: Tue Nov 09, 2010 10:09 am

old build complains

Post by obcd »

Thanks Mr_Nick666.

I had the impression the older version was removed because it used the older Scummvm logo with the small s. As the homebrew channel wasn't launching the program as expected as well, the only reliable way I found was launching wiixplorer from the HBC and the scummvm boot.dol from wiixplorer. This is not exactly an easy way to explain to my 9 year old daughter. So I thought, who cares about that s, I use the existing channel and replace it when the new one is ready. I didn't realise that I got the really old one that wasn't using ios 58 yet. I only started the discussion to find out why the program had problems to mount my usb disk when it was launched from that same usb disk. This wasn't a problem unique to your channel. My apologies, it was definite not my intention to bring your channel launcher in discredit.
raschi
Posts: 46
Joined: Mon Jan 23, 2006 6:57 pm

Post by raschi »

Thanks. Works great :D
User avatar
KainXVIII
Posts: 81
Joined: Mon Feb 11, 2008 10:00 pm
Location: Russia

Post by KainXVIII »

I can't install it through Yet Another Wad Manager gives me
Error -1035
User avatar
MusicallyInspired
Posts: 1138
Joined: Fri Mar 02, 2007 8:03 am
Location: Manitoba, Canada
Contact:

Post by MusicallyInspired »

You need to have the right IOS. Unfortunately, 4.3 doesn't have it. I haven't been able to install a WAD in a long time because of this and I haven't been able to get it to work.
User avatar
KainXVIII
Posts: 81
Joined: Mon Feb 11, 2008 10:00 pm
Location: Russia

Post by KainXVIII »

MusicallyInspired wrote:You need to have the right IOS. Unfortunately, 4.3 doesn't have it. I haven't been able to install a WAD in a long time because of this and I haven't been able to get it to work.
Which IOS? I presume i have them all :shock:
User avatar
MusicallyInspired
Posts: 1138
Joined: Fri Mar 02, 2007 8:03 am
Location: Manitoba, Canada
Contact:

Post by MusicallyInspired »

Hah. No. You can only have one at a time. I can't remember which, but there's only one IOS that will allow you to install custom WADs and it's extremely hard to get if you've already upgraded to System Menu 4.3 (don't confuse IOS's with System Menu versions) and involves downgrading which is dangerous.

Likewise, there's only one IOS (IOS58) that will allow you to ustilize USB 2.0 speeds.
User avatar
KainXVIII
Posts: 81
Joined: Mon Feb 11, 2008 10:00 pm
Location: Russia

Post by KainXVIII »

MusicallyInspired wrote:Hah. No. You can only have one at a time. I can't remember which, but there's only one IOS that will allow you to install custom WADs and it's extremely hard to get if you've already upgraded to System Menu 4.3 (don't confuse IOS's with System Menu versions) and involves downgrading which is dangerous.

Likewise, there's only one IOS (IOS58) that will allow you to ustilize USB 2.0 speeds.
I can install other channek forwarders (wiiflow, usb gx loader, vba emul), why i can`t install subj?
PS - and i have ios58 too..
User avatar
Mr_Nick666
Posts: 132
Joined: Wed Apr 11, 2007 9:59 am
Location: Bideford, Devon, UK
Contact:

Post by Mr_Nick666 »

Try using WAD Manager 1.7. It's what I used to install mine. :)
User avatar
KainXVIII
Posts: 81
Joined: Mon Feb 11, 2008 10:00 pm
Location: Russia

Post by KainXVIII »

Mr_Nick666 wrote:Try using WAD Manager 1.7. It's what I used to install mine. :)
I use this too, which ios you choose at the begining?
User avatar
MusicallyInspired
Posts: 1138
Joined: Fri Mar 02, 2007 8:03 am
Location: Manitoba, Canada
Contact:

Post by MusicallyInspired »

Mr_Nick666 wrote:Try using WAD Manager 1.7. It's what I used to install mine. :)
Do you also have system menu 4.3? I've tried 1.7 before, I believe, and it won't work for me. Even if I choose IOS249. It just freezes and I have to force a restart.
raschi
Posts: 46
Joined: Mon Jan 23, 2006 6:57 pm

Post by raschi »

Try this:
Download and run IOS 236 Installer.
Download and run Anytitle Deleter MOD, and make sure it uses the newly installed IOS 236.
Uninstall the old ScummVM Channel(SCUM) with Anytitle deleter.
Use Wadmanger 1.7 with IOS 236 to install the new ScummVM Channel.
Post Reply