I have an LCD monitor which has a 5:4 aspect ratio instead of the CRT-standard 4:3. (Note most 17" and 19" LCD's have this 5:4 aspect ratio these days). This means that all screen resolutions other than the LCD's native 1280x1024 resolution are stretched vertically. This includes all full-screen resolutions used by ScummVM.
There doesn't seem to be any setting on the monitor or in my WinXP video card driver (ATI 8500) that disables this stretching.
Is there any way I can run ScummVM full-screen on this monitor that will compensate for my 5:4 monitor aspect ratio? I tried the aspect-ratio correction, but that only applies to stretching games from 320x200 to 320x240, and still assumes square sceen-pixels.
Mike
Can I get the correct full-screen aspect ratio on a 5:4 LCD?
Moderator: ScummVM Team
Re: Can I get the correct full-screen aspect ratio on a 5:4
It has to be there. Open diaplay properties->Advanced->Displays->Panel and there you will see 'Scale image' in Panel Attributes. Check "Expand while maintaining aspect ratio"mband wrote:There doesn't seem to be any setting on the monitor or in my WinXP video card driver (ATI 8500) that disables this stretching.
Nah, it's driver thing.clem wrote:I don't think ScummVM has any option to counter this behaviour, seems more like an SDL issue to me?
Eugene
Unfortunately, the ATI Radeon 8500 doesn't seem to have the "Expand while maintaining aspect ratio" feature anywhere, even with the latest drivers. I also can't shrink the vertical size of my screen with manual controls because the monitor (a Dell E196FP) automatically adjusts to fill the whole vertical area whenever I try such an adjustment. (I tried the latest monitor drivers as well, to no avail.)
It appears that feature request <http://sourceforge.net/tracker/index.ph ... tid=418823> (widescreen support) would allow me to use my LCD's native 1280x1024 to get the proper aspect ratios (albeit with black borders). Is there any chance this feature might make it into the 0.9.0 release?
Thanks,
Mike
It appears that feature request <http://sourceforge.net/tracker/index.ph ... tid=418823> (widescreen support) would allow me to use my LCD's native 1280x1024 to get the proper aspect ratios (albeit with black borders). Is there any chance this feature might make it into the 0.9.0 release?
Thanks,
Mike
-
- Posts: 2
- Joined: Sun Sep 03, 2006 6:51 am
I'm running OSX Tiger on a Powermac hooked up to a 1440x900 display, and I also can't work out a way to run fullscreen without everything being squashed into the wrong aspect ratio.
I presume this is a monitor problem, though - checking on the OSD, it says it is receiving a 640x480 input, but it's cleverly deciding I want this mashed across the whole screen. No visible options for H-Size or V-Size.
Ah well, it was cheap. The only workaround I can think of would be to display large black panels either side of the 4:3 output, and I don't know if this would be ScummVM or SDL.
I presume this is a monitor problem, though - checking on the OSD, it says it is receiving a 640x480 input, but it's cleverly deciding I want this mashed across the whole screen. No visible options for H-Size or V-Size.
Ah well, it was cheap. The only workaround I can think of would be to display large black panels either side of the 4:3 output, and I don't know if this would be ScummVM or SDL.